Auto Accidents in Construction Work Zones

Summer Time to Think About Auto Accidents in Construction Work Zones

Construction work zones are a necessary travel complication if we are to build and maintain safe roads. Summer is prime time for road construction and repairs. Even with proper warning signs to direct traffic flow, road construction work zones are a safety hazard for workers and travelers alike.

The men and women who make a living in roadway construction are vulnerable to cars and trucks that do not slow down in work zones and drivers who are not alert or are distracted by changing traffic patterns. Road workers often work in close proximity to passing vehicles, but cannot watch for traffic. They are busy with tasks that often carry their own risk of injury.  They have to assume drivers (and their co-workers) are watching out for them.

Numerous accidents occur in road construction work zone accidents every week. Kentucky’s most recent car accident statistics show 727 accidents in construction work zones and maintenance / utility work zones in 2013. These collisions caused three deaths.

Nationwide, the Centers for Disease Control and Prevention says there was an average of 669 fatalities a year in construction and maintenance work zones from 2007 through 2012. The CDC breaks the numbers down by citing Bureau of Labor Statistics figures that say there were 133 worker fatalities at road construction sites in 2012, and 105 in 2013.

Motorists are most likely to be injured or killed in a work zone accident. In 2012, according to CDC and BLS figures, more than 78 percent of work zone fatalities were non-workers.

Raising awareness about highway work zone safety

The positive news is that the number of work zone fatalities has decreased in the United States every year since 2002, according to the FHA. The decline is attributed in part to the annual National Work Zone Awareness Week. This program has encouraged workers to make themselves safer through additional training and precautions such as wearing high-quality safety vests, ensuring proper operation of caution lights on work vehicles, and making sure that work zones are designed to function properly.

The campaign has raised awareness of the dangers of traveling too fast for road conditions in work zones and encouraged drivers to slow down and drive more safely in work zones.

Driver-related factors that contribute to work zone crashes include speeding, distractions (such as cell phones, texting, and radios), inattentive driving, and aggressive driving, the FHA said in conjunction with the 2015 National Work Zone Awareness Week.

Driving in work zones requires motorists to be alert and to be prepared for sudden lane changes. Normal speed limits may be reduced. Traffic lanes may be closed, narrowed, or shifted. People may be working on or near the road.

In 2013, speeding was a factor in 23 percent of fatal work zone crashes, according to the FHA. The main type of work zone crash is a rear-end collision, and adequate following distance is important in avoiding such crashes.

Among highway construction workers, the leading cause of injuries and fatalities is contact with construction vehicles, objects, and equipment. Workers must also remain alert to avoid accidents.

Divers can avoid being involved in work zone accidents if they’ll:

  • Slow down
  • Obey road signs and road crew flaggers
  • Maintain a safe distance between their vehicles and other vehicles, workers and equipment.
  • Remain alert and avoid distractions.

Remember that you can plan ahead by going to to check on traffic, road construction zones and other events where you plan to travel and, at the website, there’s an app for that, too.